-
- Is Your
PC Performing Badly? Scan for Windows Registry Errors with RegCure
PC performance inevitably becomes jaded over time for various
reasons. Possibly the most common problem with any computer that
many people try to ignore is that it becomes sluggish at best.
Many computer users suffer the problem but simply believe it to be
a symptom of use or age. This is unlikely to be the case and there
is usually a much more specific and, more importantly, curable
reason.
- Fatal
Errors And Exceptions
Fatal errors are not only annoying but can also cause the loss of
work and serious frustration and anger. When the blue screen
starts to appear it is sometimes considered the beginning of the
end of a computer’s life. Some users may consider trying a system
restore to a time when there computer worked well enough but may
purchase a new computer in preference to hunting down the real
cause of the problem.
- A
Freezing Computer
When your computer freezes it generally leads to having to do a
hard reboot. Again, this can cause a loss of data and considerable
time while your computer runs the scan disk error checker. There
really is very little else quite as frustrating.
- Cure The
Problem, Don’t Mask The Symptom
It’s important to realize early on that these “problems” aren’t
usually the actual problem and are mere symptom of the problem
itself. It is true that older computers are more susceptible from
suffering these symptoms and it may be the case that your hard
drive is nearing capacity but if you’ve checked there’s still room
and the problem persists then you should keep looking for the
problem.
-
Malicious Software And Files
It’s a well-documented fact that spyware, malware, adware, and
viruses have a detrimental effect on your computer’s health. Run
anti-spyware and anti-virus software to establish whether this is
a problem or whether you are clean. If you haven’t been using a
firewall or protective software then there’s a good chance that
you are infected, even if this isn’t the cause of the problem.
-
Do-It-Yourself Registry Hunting
If your PC is displaying signs of poor performance mentioned above
and you’ve checked your hard drive size, run anti-virus software,
and anti-spyware software but you’re still suffering then it’s
likely that your problems can be found in the Windows registry.
Searching through the registry yourself and locating all of the
potential problems that exist is a near-impossible fate and is
best left alone for a number of reasons.
- What Is
The Windows Registry?
The Windows registry is a vital component of your computer. It is
basically a database that contains all the relevant information
that relates to your hardware, your operating system, and the
users of your computer. Virtually every change you make on your
computer is altered and registered within the confines of the
registry. As you can imagine there is a lot of important
information that should not be tampered with unless you know what
you’re looking for and what to do with it when you find it.
- Why The
Registry Causes Problems
Because of the regular changes, additions, and deletions that you
and your software make to your computer the Windows registry will
often have problems. Some of these problems are virtually
immaterial and unimportant but others can have very negative
effects on your everyday computer use. If you don’t fix these
problems then they are likely to get worse and not better. That is
where RegCure can assist you.
- What Is
RegCure?
RegCure
is a registry cleaning application. It can detect and cure any
problems that your Windows registry is currently suffering from.
By installing and regularly using it you can effectively ensure
that your computer runs at optimum speed and performance over its
entire lifetime. It scans and detects incomplete, damaged or
corrupt, and missing registry entries. A standard computer user
simply wouldn’t know where to start looking for this kind of
information and even those that do would not want to begin.
-
- What
RegCure Does
With a much greater feature set than other registry cleaners and
the ability to perform the deepest scans it is by far one of the
most powerful and useful registry tools available. RegCure will
look for problems that have been left behind after removal of
spyware. It will also look for problems and entries left behind
from failed installations and uninstallations, and disabled
drivers. This means that if RegCure can’t find a problem then
there probably isn’t one to find.
Step 1 – Back Up Your Registry
Backing up your registry is probably the most sensible area to
start when you first install RegCure. Any changes you make from
here on in can be recovered if you do this first. The registry is
partially responsible for a lot of the work your computer does and
if you remove or “repair” the wrong thing then you can do serious
and otherwise irreparable damage. The backup feature, then, is a
useful one.
Step 2 – Automating And Scheduling Tasks
Next you should set up the scheduler to run at least once a week.
Heavy computer users should consider increasing this as much as
possible. Don’t forget that every time you log on to your computer
you are opening and potentially affecting the Windows registry.
Every time you log on to any software, delete or amend files,
download, or fail to download anything you will be leaving
undesirable tracks on the registry. Even those that don’t cause
any specific harmful effects will leave files and entries that
take up valuable space. Too many like this and your computer will
start to run very slowly and you may experience some negative
effects.
Step 3 – Set To Automatic Repair
During your first scan decide whether you want to use the
automatic or manual repair. Automatic repair means that once the
scan has completed RegCure will automatically take the required
option to fix the problem. If you know little or nothing about the
registry or you simply want to leave RegCure to do everything for
you then choose automatic. For a little more control then choose
manual.
Problems RegCure Can Remedy
RegCure can clean and improve masses of different aspects of your
Windows registry. The following are just some of the options you
have and some of the ways in which RegCure can really help to
improve your computer’s performance.
- Startup
Management
A lot of PC users find that their computer runs particularly
slowly when they first start it up. This is often because there
are so many programs that are set to open when you turn your PC
on. Not only can this be irritating and slow your PC down but
there may be programs in there that you weren’t aware were acting
in this way. This is a particularly common way for viruses or
spyware applications to act. RegCure offers simple access to this
information as well as an equally simple method to stop any
programs performing in this way.
- Invalid
ActiveX Entries
Incorrect or missing ActiveX or COM entries within the registry
will generally lead to applications failing to open, and other
problems. You could lose work, information may become lost and
your system is likely to start crashing on a regular basis.
RegCure will search for all invalid COM and ActiveX entries and
repair the damage.
- Install
And Uninstall Entries
Installing and uninstalling software is a problem area in terms of
keeping the Windows registry clean and smart. Canceling an install
or a failed installation will generally leave tracks, files, and
registry entries behind. These combine to cause a serious drain on
your memory and can cause problems with future installations.
Finding and removing any traces of failed installations manually
is very difficult because the usual uninstall process is not
available.
Uninstalling software should be done either on the Windows control
panel add/remove programs screen. Failing to do this will often
leave the icon on the uninstall menu, as well as similar tracks to
those found after a failed installation. Again, these could prove
to be a major cause of any computer performance problems you are
currently suffering from. Sometimes the uninstall package included
with software itself fails to operate properly and this too can
leave undesirable entries in your registry as well as unnecessary
files and folders. Both clog up your system resources and cause
your computer to run a little slower.
-
Application And File Paths
A major cause of failed applications or files that cannot be
opened or referenced is a corrupt or incorrect path. There are
many reasons why this can happen. Badly coded software, updated
software, and failed install and uninstall commands are just some
of the common causes. All of these problems, and more, can be
fixed by RegCure This enables you to use all of your software and
open all of your files.
- Program
Shortcuts
Most computers have a large amount of program shortcuts. They are
not only used for easy opening of files, folders, and software but
some applications use them as well. If the shortcut is invalid or
points to an invalid address then applications will either perform
badly or simply not work at all. RegCure will quickly and easily
find all of this information for you and fix the problem. In some
cases, it is imply a case of deleting the shortcut if it is not
required, and in other circumstances it could be a case of finding
the correct path and altering the shortcut accordingly.
- Ease Of
Automation
One of the major reasons that people look for registry cleaners is
to easily improve their computer’s performance. RegCure is simple
to use thanks to an intuitive system. All options are available
through just one or two clicks of your mouse and because it is
possible to automate and schedule the entire process you may
reasonably only need to set the program up the way you want it and
leave it to work every day, week, or month.
The scheduler means that you will never forget to run the
application and means you can decide whether you want to run it
daily, weekly, or as often or infrequently as you like. You can
also choose to download updates automatically to ensure that you
always have the latest version, the latest features, and the
latest known corruptions. Again, this makes your life much easier
and ensures that you regularly update the software.
Automatic repair means that once RegCure has completed its scan it
will automatically repair items. Because the settings are
configurable you can choose to only scan for certain items and to
only repair certain items. Alternatively, for full cover, you can
scan for every known error and repair everything possible.
- Free
Scan
If you’re not sure whether you really need a registry cleaner then
the first thing you should do to help you decide is to find out if
you have any computer problems. Obviously you will know if any of
the usual symptoms are presenting themselves but using the RegCure
free scan you can quickly and easily determine whether RegCure
would be able to help alleviate these symptoms and improve the
overall performance of your computer.
You should prepare yourself, though, because it is not uncommon to
find literally thousands of problems with your initial scan. Don’t
forget that you are also detecting temporary Internet folders,
your history of recent files and documents, and other actions that
you perform regularly. If you haven’t run a registry cleaner
before then it is possible that your registry could contain files
that you haven’t used since you first bought your computer.
The free scan really is that. It will perform a complete scan of
your registry and identify any possible problems that you are
suffering. This should help you determine whether your computer
has problems that can be fixed with this software and whether you
feel it is worth the money. We suspect you will.
- Problems
With Trying To Fix It Yourself
Searching your own registry is a difficult task. There are
thousands and thousands of entries in the registry, many of them
are perfectly valid and legitimate entries and your computer would
suffer a lot more problems should you start deleting files that
you don’t recognize or understand. Taking a registry clean into
your own hands really is a potentially dangerous move. With very
little opportunity to undo the changes you make you should always
leave system changes to someone or something that understands
them.
-
Protecting Your Major Investment
Computers have become more and more commonplace in the home and
can be a major investment. Left unchecked, problems with your
registry can have serious effects on your computer. Only with a
registry cleaner can you really prevent these negative effects in
the long run. Because RegCure is one of the most powerful registry
cleaners that money can buy you are giving yourself a real
fighting chance of prolonging the life of your computer.
- Summary
Computer performance is affected by a large number of factors.
Obviously, malicious software and viruses can play a big part, as
can the capacity of your hard drive. However, one of the most
common causes of poor computer performance is a problem within the
Windows registry. Missing, incomplete, damaged, deleted, or
extraneous registry entries all play a part in slowing down your
computer, preventing applications and files from opening, and
causing fatal errors on your computer.
Locating and fixing these registry problems manually is impossible
for all but the most experienced and the most highly
knowledgeable. Attempting to fix problems by deleting system files
or altering registry entries is likely to make matters much worse
if you don’t fully understand what you are doing. RegCure does
know what its doing and it knows how to improve the performance of
your computer.
RegCure can be fully automated to ensure that you clean your
registry regularly. You can also automatically download updates
and
even automatically repair items once RegCure has finished its
scan.
All in all RegCure is an excellent value and can ensure that your
computer has a longer life and that it continually performs at its
optimum level.
-
-
- For a
limited time you can download the RegCure Registry Cleaner and
Optimizer Absolutely FREE!
-
.gif)